Quantity | Price per item | Discount |
5 items | €10.99 | 21% off |
For universal use
Outstanding adhesive strength on a wide range of materials and surfaces
Approved for use with foodstuffs (ISEGA certificate)
Highly elastic
Long skin formation time
Can be sanded and painted over
Following skin formation, it can be mechanically machined and painted over without surface activation (perform preliminary tests to check paint compatibility).
Non-corrosive
Prevents metal corrosion
Low-odour
Silicone-free
ISEGA:
Can be used where food is processed or stored, e.g. for bonding wall and floor areas in food processing companies.
Clearance certificate no.: 46567 U 18
Optimisation table | ||
Surface/material | Optimisation steps* | Notes |
Coil coating |
Activating Cleaner |
- |
Anodised aluminium |
1. Activating Cleaner 2. Primer for Metal |
- |
Aluminium (AlMg3, AlMgSi1) |
1. Clean thoroughly with IPA cleaner 2. Sand lightly with "very fine" non-woven abrasive 3. Clean again with IPA cleaner 4. Activating Cleaner 5. Primer for Metal |
- |
Non-ferrous heavy metals (brass, copper, bronze etc.) | Primer for Metal must be used! | |
Stainless steel (rustproof) | - | |
Steel (St 37 etc.) | For components susceptible to corrosion: 2-component PU or epoxy corrosion protection is required! | |
Zinc-plated steel (hot-dip or conventionally galvanised) | - | |
Zinc | - | |
Powder coatings |
Activating Cleaner |
Preliminary testing is recommended for applications involving significant forces or a damp environment. |
(PES, EP/PES) | ||
2-component top-coats, water- or solvent-based (PUR, acrylic) |
Varioprimer safe + easy |
Due to the large number of paints available, this information is only intended as a guide. Please perform preliminary tests where necessary. |
2-component primers, water- or solvent-based |
Varioprimer safe + easy |
- |
(PUR, acrylic, epoxy resin) | ||
Cathodic dip coating |
Activating Cleaner |
- |
(E-coating) | ||
ABS |
1. Activating Cleaner 2. Primer for P/W/S |
The sanding process can be omitted for parts subject to low loads. |
GFRP (unsaturated polyester), gelcoat side or SMC |
1. Clean thoroughly with IPA cleaner 2. Sand with "very fine" non-woven abrasive or grit 60-80 and then vacuum 3. Clean again with IPA cleaner 4. Activating Cleaner 5. Primer for P/W/S |
The adhesive surface must be protected against UV radiation (opaque cover). |
Hard PVC |
1. Activating Cleaner 2. Primer for P/W/S |
- |
PMMA/PC (without scratch-resistant coating) |
Varioprimer safe + easy |
The adhesive surface must be protected against UV radiation (opaque cover). |
Polyamide |
Varioprimer safe + easy |
- |
Wood, plywood, MDF, wood products and cork |
1. Remove dust 2. Primer for P/W/S |
- |
HPL laminated panels (Resopal, Ultrapas) |
Activating Cleaner |
- |
Glass |
Varioprimer safe + easy |
The adhesive surface must be protected against UV radiation (opaque cover). |
Enamel, porcelain, ceramic, tiles |
1. Activating Cleaner or IPA cleaner 2. Varioprimer safe + easy |
- |
Concrete, mineral mortar, plaster and cement fibreboards |
1. Remove dust 2. Deep-penetrating primer |
- |
Artificial stone (Corian, Varicor) |
1. Activating Cleaner 2. Primer for P/W/S |
- |
* Follow the appropriate sequence of individual steps |
Bond and Seal products |
B+S 0890 100 1 - 6 0890 100 111 - 3 0890 100 181 - 3 0890 100 11 + 13 |
B+S Power 0893 235 1 0893 235 2 0893 235 3 |
B+S Fast 0890 100 710 0890 100 720 0890 100 730 |
B+S Combi 0893 236 110 0893 236 120 0893 236 130 |
|
Metal |
Aluminium |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
Lead | x | x | x | x | |
Stainless steel |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
Copper |
⎷1 |
⎷1 |
⎷1 |
⎷1 |
|
Brass |
⎷1 |
⎷1 |
⎷1 |
⎷1 |
|
Steel/iron |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
Zinc |
⎷1 |
⎷4 |
⎷1 |
⎷1 |
|
Plastics |
ABS |
⎷2 |
⎷2 |
⎷2 |
x |
GFRP |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
Rubber/neoprene | x | x | x |
⎷ |
|
Hard foams |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
PE | x | x | x | x | |
PMMA |
⎷5 |
⎷5 |
⎷5 |
- | |
Polyamide |
⎷5 |
⎷5 |
⎷5 |
⎷ |
|
Polycarbonate = PC |
⎷5 |
⎷5 |
⎷5 |
- | |
Expandable polystyrene (not foam!) |
⎷2 |
⎷2 |
⎷2 |
- | |
PP | - | - | - | - | |
PTFE | - | - | - | - | |
Polyurethane = PU |
⎷2 |
⎷2 |
⎷2 |
⎷ |
|
Hard PVC |
⎷2 |
⎷4 |
⎷2 |
⎷ |
|
Silicone | - | - | - | - | |
Expandable polystyrene | - | - | - | - | |
|